|
|
|
#1
|
||||
|
||||
Just changed the vacuum modulator..........
I have a '79 450SL that had a bad modulator on the trans (bad seal; i.e vacuum leak). When I removed the modulator, there was a metal rod and spring attatched to it. Is there anything else that is supposed to come out with the modulator? I really feel that I missed something here when reassembling. I have yet to drive the car as it is on jack stands getting new subframe mounts, tie rods, steering gear box and coupler. I dont want to drive it until I have verification that my work is correct.
Has anyone else changed these, or have any experience on these trannys????? Any help would be greatly appreciated!!!! Rich '79 450 SL Silver/red int. 185K |
#2
|
|||
|
|||
If you haven't already, you might try the Tech Help forum on this site.
__________________
Mike Heath 1988 560SL Black/Palomino 1988 300SEL Black Pearl/Burgandy 1984 500SEC Anthracite Grey/Palomino |
#3
|
||||
|
||||
Thanks.......I'll be sure to post there as well.
-Rich |
#4
|
||||
|
||||
Just wanted to say that my trans problems are now history. I made a few adjustments on the modulator, and presto. It feels like a whole new trans.
Thanks for the reply!!!! -Rich |
Bookmarks |
|
|