Used 300mm and 278mm ATE brake kit for sale - it came off my 500E after my 334mm Brembo brake kit upgrade.

The calipers were painted code 199 Pearl-Black color and the front calipers were lying around for a while at my tuners shop under additional springs and calipers, which ended up chipping some of the paint. There is a sticker on the front calipers under the clearcoat with my tuner’s shop name - R. B. Tech. Calipers still have Porterfield R4-S brake pads in them with 5K miles on them. Front and rear rotors are Brembo cast-holes rotors with 5k miles on them - I went back and checked my dates when the rotors and brake pads were installed back then since in my initial post for the 334mm brake kit upgrade I listed the mileage for the rotors and brake pads at 11K, which was too high.

Asking $400 obo + shipping for everything.

I also have almost new but scorched Brembo cast-hole 334mm front rotors that I can sell (last two pics). The rotors were scorched a bit during a test drive with original (early) lower control arms still installed on my 500E, so the LCA ball joints rubbed a bit inside the rotors. For these I will take any reasonable offer + shipping.

Attached Thumbnails

         

__________________
1992 Pearl Black 500E

bump

__________________
1992 Pearl Black 500E