|
|
|
#1
|
|||
|
|||
Wheel Allignment - Special tools required? Speciality Tools?
ML 320 2002 Km 120 000
Are there * special tools required for Front and rear wheel allignment or simply one tool required? * Are the same tool/s used for rear wheel allignment? * Can one purchase these special tools? if so where? How much? * Or are they simple to make or even simpler if you have a engineer friend? * Do you have picture? |
#2
|
||||
|
||||
it will be cheaper if you just take it to a good alignment shop or the dealer.
__________________
98 ML320 (gone but not forgotten) |
#3
|
|||
|
|||
Some non - dealer allignment shops do not possess the said tool
My thoughts were that if one had such tool/tools you can take it anywhere for allignment as the many shops will have the specs but not the tool
|
#4
|
||||
|
||||
The vehicle has to sit on an alighment rack. I don't believe there is any simple handheld tool to do that job. Any shop can do repairs but not all shop can do alignment work.
__________________
98 ML320 (gone but not forgotten) |
Bookmarks |
|
|