Where does one plug in the code reader? The check engine light just came on in my '98 ML. I understand the boys at Autozone will read the code for free, I just don't know where. TIA

Under the dash above your left foot.

__________________
1973 280SE 4.5 (Sold)
1984 LWB 280GE (Sold)
2000 G500 NMLE - "Deep Throat"
2007 ML320 CDI (Sold)
2010 Porsche Cayenne S Transsyberia TipTronic (Sold)
2010 Audi Q7 3.0 TDI (Sold and Sorely Missed)
2014 ML350 BTC
2015 Audi Q7 3.0 TDI (On Order)

FYI - all cars with OBDII software have the jack in a standard spot (under the dash on the left side of the drivers footwell). So, if your car is post '96, the big rectangular socket is there.

Question: So will any OBDII code reader be able to read the code from the ML's or are they different?

If so the next time I see one on sale I will get one.

thanks

__________________
Silver Honda Accord, 2006
Silver G500, 2003
Silver SLK-320, 2002
Black ML-320, 2000
Bule Porsche 993 Targa , 1997
Silver Merkur XR4Ti, 1987

OBDII codes are generic and can be read from any vehicle by any code reader. It's the proprietary ones that you can read without some very expensive (for now) equipment.

__________________
1973 280SE 4.5 (Sold)
1984 LWB 280GE (Sold)
2000 G500 NMLE - "Deep Throat"
2007 ML320 CDI (Sold)
2010 Porsche Cayenne S Transsyberia TipTronic (Sold)
2010 Audi Q7 3.0 TDI (Sold and Sorely Missed)
2014 ML350 BTC
2015 Audi Q7 3.0 TDI (On Order)

So you could buy a generic one and it will plug in and possible read some of the codes?

thanks

__________________
Silver Honda Accord, 2006
Silver G500, 2003
Silver SLK-320, 2002
Black ML-320, 2000
Bule Porsche 993 Targa , 1997
Silver Merkur XR4Ti, 1987

Yes. I use one regularly on my 2000 G500 and my other cars.

__________________
1973 280SE 4.5 (Sold)
1984 LWB 280GE (Sold)
2000 G500 NMLE - "Deep Throat"
2007 ML320 CDI (Sold)
2010 Porsche Cayenne S Transsyberia TipTronic (Sold)
2010 Audi Q7 3.0 TDI (Sold and Sorely Missed)
2014 ML350 BTC
2015 Audi Q7 3.0 TDI (On Order)