|
|
|
#1
|
|||
|
|||
I cleaned my EGR Tube and didn't break anything!
It fixed the P0400 code which kept my CEL lit.
I also created a DIY for this as I couldn't find one anywhere. I hope this helps someone else who decides to tackle this job. send me an e-mail at ordway.dc@pg.com if you want a copy. It is too large to post here (490kb) Better yet... does anyone know where I can host a document like this? That way I could post a link here and the DIY would be a click away -Dave Last edited by dave45056; 03-31-2009 at 10:11 PM. Reason: added the Better yet... comments |
#2
|
||||
|
||||
Dave -- Thanks for going to the trouble of writing it up. I'd like a copy and will send PM.
But there are already a few threads on this process including this one: Cleaned EGR Tube
__________________
Behind every great man is a great woman. Behind every great woman is a great behind. |
#3
|
|||
|
|||
I saw that write up, but it left many question open for me. I did not want to break anything, so I was careful, and I thought some other people may appreciate a DIY with pictures and watch outs. Hope you're not offended.
By the way sunedog, I really like your quote. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|