|
|
|
|
|
#1
03-05-2002, 10:12 AM
|
|||
|
|||
|
Draining and Flushing Coolant
I am planning to drain and flush the coolant on my 99 ML 430. I believe this is recommended every 3 years.
Are there any drain plugs and vents on the engine block that I should look for? I've done this before on my 300E and there is or are vent plugs for draining the coolant and bleeding the air out, as well as topping off the engine block with coolant. I will also be replacing the thermostat (integrated with the housing) and radiator hoses with this task. I would appreciate additional suggestions and comments. THANK YOU.
__________________
Josemin 88 MB 300E 88 MB 560SEL 99 MB ML 430 
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Draining, Flushing | djjeant | Tech Help | 0 | 07-20-2003 11:09 PM |
| Magically teleporting coolant | seacoast_benz | Tech Help | 2 | 07-06-2003 09:17 PM |
| Flushing Oil | grober | Tech Help | 12 | 11-05-2002 08:51 PM |
| Draining and Flushing M103 | Bud | Tech Help | 5 | 09-30-2002 03:32 PM |
| Simplified coolant flushing. | GregS | Diesel Discussion | 2 | 08-03-2001 12:30 PM |
Threaded Mode
