|
|
|
#1
|
|||
|
|||
560 water pump torque value,, Please look up in your manual
I need the torque value for the 8x1.25 bolts that hold the water pump to the block, can you please look it up on your CD. Mine is packed up in a box form a move. I am 1/2 way through the change and need a torque value ASAP
Thanks john |
#2
|
||||
|
||||
I don't have your info but in a clutch this has helped me a lot:
http://www.google.com/search?hl=en&q=standard+torque+values&btnG=Google+Search Danny
__________________
1984 300SD Turbo Diesel 150,000 miles OBK member #23 (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination |
#3
|
|||
|
|||
M8 x 60, M8 x 65, M8 x 85 all 25NM according to my CD. This is for an '87 560SEL.
|
#4
|
|||
|
|||
Pump changed
Thanks to all.. Its back together. I just moved and could not find my CD. OH by the way the shaft is in the low pressure section, so a slow leak with not leak with the engine running, If you loosen the pressure cap. I made it home 497 miles with no loss of cooling fluid.
On the 560 you do have to remove the harmonic balancer even if you have the proper offset 13 mm wrench, the bolt is longer than the clearance. I just loosened everything and removed all the belts and large hoses. Left the radiator in, but covered it with cardboard. Came out easy enough I ws putting it back together when I could not find the torque, It took about 10 Hours total, with only the notes from this website for guidance, but it went fine it is a 5 of 10 for difficult. Thanks to all. |
Bookmarks |
|
|