Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > General Discussions > Off-Topic Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-27-2009, 07:42 AM
Aquaticedge's Avatar
Bump on a log
 
Join Date: Nov 2009
Location: See Biography
Posts: 3,148
Anyone Familuar With HP Laptops?

I hope someone can give me a second opinion on this. I have a HP Tx2 Touchsmart laptop. It's 64bit with an AMD processor and I am running Windows 7. it has 4GB ram etc. I just Upgraded to Windows 7 and I ran the CD that says Run this before running the operating system. What it did was check my programs to see if there was anything incompatible (there wasnt) both software/hardware. It also Flashed my BIOS to a newer Version then I had installed, Here's the problem. my computer will hibernate randomly. When you turn it back on it says the computer was put into hibernation because BIOS had detected a high temperature, I run this computer only on hard surfaces, when I got the computer I also added a Rubberized spacer to the rubber feet giving the computer a larger Gap and let it cool better. when this happens I've had my hand near the Air vent and warmish air is flowing out, but it's not as hot as my XPS 1730 was, nowhere near, the base of the computer is also cool to the touch. I've contacted hp's Support about the issue and their soloution is to Restore the HDD back to the previous state that it worked on... but to my knowledge there's no way to go back as the bios was flashed and thats when the problem started.. I've never tried to re-flash a bios to a lower version before, I dont even know if it's possible let alone advisable. Can you think of anything that I could have missed or should I cut my losses and have to reinstall vista?
the computer is about 4 months old.

To sum it up basically
Bios Shuts down thinking the computers too hot.
the computer is cool and is cooling fine with only warm not hot air flowing out

__________________
hum.....
1987 300TD 311,000M Stolen. Presumed destroyed
Reply With Quote
  #2  
Old 12-27-2009, 08:05 AM
powerpig's Avatar
In Memory of the Sam Man
 
Join Date: Feb 2006
Location: Guntersville, AL
Posts: 649
Go into the bios and reset the max temp threshold.
__________________
99 ML320
94 SL600
92 SL500
95 E320 Cabriolet
87 560SEC
86 300SDL Grease Car
80 380SLC Euro

13 Fiat Abarth
02 Maserati Spyder Cambiocorsa
00 BMW Z3
90 Rolls Royce Silver Spur
80 Ferrari 308 GTSI
88 Jaguar XJS12 H&E Edition
99 Land Rover Discovery
Reply With Quote
  #3  
Old 12-27-2009, 08:11 AM
Aquaticedge's Avatar
Bump on a log
 
Join Date: Nov 2009
Location: See Biography
Posts: 3,148
Cant, There's no temp setting in the bios, thats the kicker.

__________________
hum.....
1987 300TD 311,000M Stolen. Presumed destroyed
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page