Hello everyone:
O just got a problem with my daughter Suzuki Forenza 2007 which has no pressure in the clutch hydraulic system. The car has manual transmission
I had verified the hydraulic fluid level and it is fine now. It was in the minimum level before but there is no one sign of leakage. I bled the entire system and I have pressure at the clutch master cylinder and also at the end of the hard tubing line that go into the transmission. The bleeding plug is right there. I still have the clutch pedal traveling all the way to the bottom with very light force.
I am not sure if I should replace the master cylinder or if there is some other try to be done before order and replace this part.
My daughter said that it was happened in about 10 minutes when driving and she felt the clutch pedal moving down with a very light pressure applied on it and after few gear changes the clutch did not work anymore.
I would like to hear some ideas in what to do and how to troubleshoot this system to know better what can be wrong with it and get it running again.
The car has only 38,000 miles and very well kept.
I will be glad in receiving your suggestion.
Thanks

Nyko46

__________________
Nyck - TX - USA