Does anyone know where in the US to find drill bits like the one below? It’s made or distributed by Bosch/HSS but there are probably other manufacturers and/or distributors.



Anywho, I’m looking for cone shaped smooth sided drill bits

__________________
Toyota is a leader only because their drivers block everyone behind them. Oh what a feeling.

Not too hard to find, you can get them on Amazon.

Bosch 2608596400 5.2 x 71 x 8 mm Sheet Metal Cone Bit HSS Drill Bits

__________________
'86 300E 5 speed
'71 Triumph TR6
'46 Cushman Scooter
'41 Ford 9N tractor

^If you have a link to a US site i'd appreciate it. I've only found it in the UK on Amazon or elsewhere, and then only 1 size.

__________________
Toyota is a leader only because their drivers block everyone behind them. Oh what a feeling.

Try this:

https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=drill+bit+cone

Thanks! Found a good candidate on page 2, not a Bosh or HSS but that isn't crucial.

https://www.amazon.com/Atoplee-16-30-5-Umbrella-Chamfer-Cutter/dp/B00R7HAL5I/ref=sr_1_24?ie=UTF8&qid=1466272078&sr=8-24&keywords=drill+bit+cone

__________________
Toyota is a leader only because their drivers block everyone behind them. Oh what a feeling.

I see the stepped conical bits at hardware stores regularly. I have a friend who swears by them, I don't often deal with sheet metal so it's not a big item for me.

__________________
Te futueo et caballum tuum

1986 300SDL, 362K
1984 300D, 138K

I will use it to drill into aluminum bars to get smooth cone shaped holes. The step drill works great except that it leaves the steps inside the hole, which is not what I’m after. The smooth sided cone drill will be used to remove the steps left by the original and leave a fairly polished surface.

It’s a pita to use a dremel to remove the excess material from the original and then polish.

__________________
Toyota is a leader only because their drivers block everyone behind them. Oh what a feeling.

Ah, of course, if the cone shape is what you want. I suspect such things are halfway common for machinists. That sort of reamer looks a bit like a gun drill.

__________________
Te futueo et caballum tuum

1986 300SDL, 362K
1984 300D, 138K

Thanks for that suggestion. Once I get the prototypes worked out I’ll see if a machine shop can produce some with nicer fit and finish than my garage shop permits.

__________________
Toyota is a leader only because their drivers block everyone behind them. Oh what a feeling.

Ryobi 5/8 in. High Speed Steel Countersink-A10CS82 - The Home Depot

-the angle on this should match countersunk fasteners a bit better than the long cone that is pictured above. (webpage just used for the picture, I'm not advocating HD or Ryobi over any other brand...)

-John

__________________
2009 Kia Sedona
2009 Honda Odyssey EX-L
12006 Jetta Pumpe Duse
(insert Mercedes here)

Husband, Father, sometimes friend =)