|
|
|
|
|
|
|
|
#1
|
||||
|
||||
|
So how much trouble am I in?......
Well... Heard some odd noises..a popping noise.... I decieded to check it out... here is what I found....
The Sway bar/parts........... ![]() ![]() ![]() ![]() So what is everyones thoughts?????????????? |
|
#2
|
||||
|
||||
|
I'm thinking that the worst part will be getting off the old parts. Soak with penetrating fluid.
Putting on the new ones shouldn't take more than a few minutes per side. (not including jacking up the car and removing the tire) Do both sides (just in case you were thinking of only doing one side)
__________________
It is a truism that almost any sect, cult, or religion will legislate its creed into law if it acquires the political power to do so. Robert A. Heinlein 09 Jetta TDI 1985 300D |
|
#3
|
||||
|
||||
|
So it's a pretty easy job once old parts are off? That's good to know.........
|
|
#4
|
||||
|
||||
|
Don't know which car you have but Phil has the link for mine for $25.05
Michael
__________________
Usta haves '69 250/8, '76 280C, 1971 250C 114.023, 1976 450SEL 116.033 Current have, 1983 300SD 126.120 |
|
#5
|
||||
|
||||
|
I was just looking at that... It will be ordered tonight.......
|
|
#6
|
||||
|
||||
|
17mm wrench and a pair of vise grips and your good to go. Probably take longer to get the tire off than to change the link.
__________________
--------------------------- No matter how many times you explain it to me, I'm still right.....Surf-n-Turf |
|
#7
|
||||
|
||||
|
yep. one of the easier jobs.
and it will make a big difference in your stability. amazing actually. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. [SIGPIC]..I also have a 427 Cobra replica with an aluminum chassis. |
![]() |
| Bookmarks |
|
|