Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-26-2000, 10:10 PM
Registered User
 
Join Date: Aug 2000
Location: Houston, Texas
Posts: 333
I have a question for the group. I have an 82 240D and have noticed witin the last couple of months that during idle, the engine appears to be loping as though an injector was clogged. It isn't bad but I do believe that this engine was idling smoother when I purchased it a few months ago. I have adjusted valves, ran diesel purge, replaced both fuel filters and even went as far as purchased a new set of injectors today and it still has the same symptoms. During high engine speed, the problem disappears. The car only has 106,000. The previous owner had the timing chain replaced a couple of years ago.

Another thing that I have noticed is that before I replaced the injectors today, it would appear to be idling alot smoother after being driven for a while.

Is it possible that a valve could be bad? One thing that I did notice that when I was cranking the engine after installing the new injectors is that the compression strokes appeared even on all cylinders during the starting process. I know this isn't the correct way to do a compression test, but I had a Honda years back that had a bad valve and every time you started that engine, you could tell that one cylinder was weak during the starting process (loping before the start). It just seems that this car has very little mileage to be having valve problems.

Haven't taken it in for injection timing or compression test but that may be my next step. Any suggestions?

Thanks
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
240D "nailing" & rough idle TedG Tech Help 0 07-28-2004 12:44 PM
'96 E300D, weird diesel engine problem jarvisto Tech Help 0 06-25-2004 01:21 AM
Shaking engine at idle- very smooth at slightest acceleration 86560SEL Diesel Discussion 15 11-21-2003 03:23 PM
my low, rough idle, stall, hot /start solution: E320/300 rvenerac Tech Help 3 11-20-2003 09:59 AM
240D engine compatibility 616 912 versus 615 912 engatwork Tech Help 3 12-03-2001 04:04 PM



All times are GMT -4. The time now is 12:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page