|
|
|
|
|
#1
08-31-2004, 12:35 PM
|
|||
|
|||
|
Help with camber correction bolts
Can someone who has installed these bolts please help me out. Me and my mechanic were looking at them but we are kind of clueless on how they go in and how they work. Any help would be appreciated. I have my car lowered and need to get these on asap. Thanks guys.
__________________
1997 E420 Black Opal "Why do I have to be Mr Pink"? Last edited by craiggotgame; 08-31-2004 at 12:37 PM. Reason: spelling 
|
|
#2
09-01-2004, 02:12 AM
|
|||
|
|||
__________________
1997 E420 Black Opal "Why do I have to be Mr Pink"?
|
|
#3
09-01-2004, 06:07 AM
|
|||
|
|||
|
I had a set fitted to my 126, not sure if your suspension is the same though.
On my car the lower arms were removed and the bushes driven out and replaced with the new bushes which have offset pins in them. Matt.
|
|
#4
09-01-2004, 08:13 AM
|
|||
|
|||
The camber/caster correction kits are good ONLY for +- 0.5deg MAX correction. The off-set washer goes into the slot to move the arm in OR out. Good luck
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
