Folks,
The very thin inner lip on one of the discharge holes on the manifold of my A/C compressor is damaged. I replaced a "blown" o-ring for this hole last summer, and it blew out again last month. There is a 1/8 gap in the lip.
I've replaced the o-ring again and all is working fine, for now. But I do want to replace the manifold. I do not see this part listed from any suppliers. Any suggestions about where to find one?
My car is a 1991 560SEC successfully using R-134a. BTW, I strongly recommend using the fluorescent dye to track down leaks. It shows up wonderfully in daylight or with a blacklight. Best leak detector I've ever used.
John