Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-14-2004, 12:58 AM
Registered User
Join Date: Dec 2003
Location: Az
Posts: 79
Water pump replacement

Planning on replacing a water pump on a 95 (124) E300D (606). I've done this on other vehicles but never on this model. What tools can be used inplace of the MB special tools for the clutch fan removal and belt pulley? The work order calls for placing the #1 at TDC before removing the TDC sensor and noting the line up. Can't the sensor be marked as it sits relative to the crank without rotating the whole deal? I plan on replacing the belt and tension shocks - any other prudent things to address while I'm there? Thanks

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page