I will remove the left hand side head, do I need to remove the intake manifold or does the head have enough clearance to come out by removing the bolts from both manifolds?

__________________
Thanks, Juan

You will need to remove the intake. Each head gasket (sold individually) will come with a full set of intake gaskets.

Be careful removing the intake bolts, they have a tendency to have the hex heads strip out. Avoid using an impact wrench to remove them as they will only make the problem worse.

__________________
Chas

Had a 380SL, 450SL, 380SEL, 420SEL, 500SEL

Got a Euro 500SEC right now.