Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-07-2004, 10:58 PM
Registered User
 
Join Date: Mar 2003
Posts: 20
Outside noise with windows up

I seem to get road and outside noise. I have a 1992 500sel with double glass
and wonder why. Do I need to replace the seals in the windows? anyone have this same thing happing...? also could it be the door seals?? what could I try
Reply With Quote
  #2  
Old 10-08-2004, 06:46 PM
Registered User
 
Join Date: Feb 2002
Location: east coast
Posts: 1,255
i was getting wind noise on my 1998 C230, sounded as though a body panel was shunted or a window wasn't closing tightly.
The culprit of the noise was that a metal heat shield under the car had bent down into the slipstream. Bent it back up and the noise went away.

I think when I use a garden hose to spray down the botton of my car it moves the shield down a bit and then when I get on the road for a high-speed cruise the wind moves the metal piece further down and then the noise.
Reply With Quote
  #3  
Old 10-10-2004, 12:26 AM
Registered User
 
Join Date: Apr 1999
Location: Cincinnati, OH, USA
Posts: 59
I have a 92 500SEL also with the noise problem. I have a slight tear in the rubber seal at the very corner of the door at the top which seems to cause the wind noise
__________________
Thanks

Fred Berry
fredcberry@peoplepc.com
92 500 SEL
Reply With Quote
  #4  
Old 10-12-2004, 10:29 PM
Registered User
 
Join Date: Apr 2001
Location: Joliet Illinois
Posts: 309
This was my problem:

My 300e had wind noise that I could not locate using the dollar bill trick (you pinch a dollar bill in the weatherstrip to check tighness all the way around).

Eventually the window regulator failed and when I replaced it the noise was gone. Appently, the window was not going up tight enough to seal out the noise and the new regulator fixed it...just another possibility.
Reply With Quote
  #5  
Old 10-14-2004, 09:58 PM
Registered User
 
Join Date: Mar 2003
Posts: 20
Thanks everyone, I am now replaceing oil tubes on the right side of my 119-
when that is done I will work on the windows...
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page