07-13-2009, 02:24 PM
|
 |
Registered User
|
|
Join Date: May 2009
Location: Cali,Fla
Posts: 50
|
|
Quote:
Originally Posted by '98 MB E320
There is no Seal on the diff just a sealant pretty straight forward as far as the procedure loosen bolt SLIGHTLY then loosen bottom bolt to drain, then remove cover, Replace Vent (## A126 350 00 90) on the top of diff and replace ALL Screws (# N 910143 010009).
Clean rear cover sealing surface and coat with Hylomar sealing compound part No. 001 989 25 20, or equivalent
Install NEW collared screws (56b) for rear cover, tighten to 50 Nm
Install NEW rear axle vent (55), then tighten to 30 Nm
Fill differential with 1.2 litersof suitable differential fluid |
Have fun
__________________
We did not inherit the earth from our parents, it is on loan from our children.
|
Hybrid Mode
