|
|
|
#1
|
|||
|
|||
94 C280 engine turning question
Hi all,
I'd like to turn the engine to position the torque converter drain plug. What size is the bolt? I can feel it when underneath the car but can feel it... thanks...
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen |
#2
|
|||
|
|||
#3
|
|||
|
|||
thanks...
I'll try that...
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen |
#4
|
|||
|
|||
You can also turn the converetr with a piece of wood as a lever through the inspection plate hole. Just a little at a time .. I see some use a large screw-driver, but that will dent the converter, the wood won't...
...the drain plug on that chassis requires a 5 mm hex head/allen |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|