Last weekend I flushed the hydraulic fluid on my '98 E320 Wagon. This is the fluid used by the power steering and self-leveling suspension. There's a filter located just inside the hydraulic fluid reservoir, connected to the return line I believe. Anyhow, does anyone know how to remove/change this filter?

Here are the parts that the dealer special-ordered for me:
Hydraulic Oil Filter 002-184-55-01 $10.06
Seal Ring 210-327-00-60 $1.61
Seal Ring 123-327-01-60 $2.88

I tried twisting the old filter off, but it didn't seem like that was having any effect. I tried pulling it straight off, too. There's a metal wire/spring at the end of the filter (looks like it runs thru the center of the filter), and I can't tell how everything is put together. Any help would be appreciated!

BTW, I flushed the fluid with 4 liters of the special MB fluid; it's like $20 per liter (liquid gold?).

Regards,
Steve
'98 E320 Wagon

Anyone?

Regards,
Steve

check this: Replaced my air cells / accumulators! (long)

Cheers,
Steve

__________________
97 S500 Coupe 139Kmi.
92 300CE 150Kmi. Sold
89 F250 Diesel 220Kmi. Dead
98 GMC 1500 160K.

Did you ever figure out how to replace the hydraulic fluid filter in your wagon? I am also stumped by how to replace this part.

that spring has a hook on the end that you dont see.

https://www.youtube.com/watch?v=w8Ux-pz7_s4

at the 4min 40sec mark

__________________
Paul