Help!! I have a 92 190E with the 2.3L 4cylinder engine.

__________________
Danny Castillo
vettesrule@elp.rr.com

2001 Corvette Z06
2006 Ducati ST3
1992 Mercedes Benz 190E 2.3

If it is like my '94 6 cylinder it is a cartridge in a housing - not an external filter housing like a fram or the like. Hope this helps, but specifically on your engine, I don't know. Should have torque specs on the cover too

__________________
dtf
1994 E320 Wagon (Died @ 308,669 miles)
1995 E300 Diesel (228,000)
1999 E300 Turbodiesel ( died @ 255,000)
2006 Toyota Tundra SR5 AC 4X4 (115,000 miles) rusted frame - sold to chop shop
2011 Audi A4 Avant (165,000 miles) Seized engine - donated to Salvation Army
BMW 330 xi 6 speed manual (175,034 miles)
2014 E350 4Matic Wagon 128,000 miles
2018 Dodge Ram 21,000 miles

Thanks Pal.

I found it. It is on the top of the engine toward the rear on the drivers side???

I guess I am too used to American cars. Thanks anyway!!

__________________
Danny Castillo
vettesrule@elp.rr.com

2001 Corvette Z06
2006 Ducati ST3
1992 Mercedes Benz 190E 2.3

That is it. There is a small stainless steel washer that goes under the filter housing cover hold-down bolt head, and the kit usually has a copper washer to seal the drain plug, and sometimes a second copper unit for the oil cooler drain if the car is so equipped.

Good luck, Jim

__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)