It was -10 this morning, and my turn column was a bit stiff. After making a hard left turn, the turn signal column would not return to its off position. I then noticed it would not move up into the right turn position at all, it seems to be locked out of that position. Hi- beam works fine. Any ideas? I have a 1984 380se, Thanks

Remove steering wheel check the cancel ring and switch,mostly is the switch. hope this help.

__________________
MB STARS Master Guild Technician,17 years MB tech
14 years independent shop owner

What type of tool do I need to remove the steering wheel? It looks like a large allen wrench might work. Also, is the switch repairable, or should I replace it from the partshop if available, Thanks again

That is 10mm allen to remove the nut,switch is not repairable. hope this help.

__________________
MB STARS Master Guild Technician,17 years MB tech
14 years independent shop owner