|
that system probably won't work. the MB application is unique because the actuator is only one wire to which you send either +12v or -12v. look at that link i previously posted - it explains most of the different standard relay hookups and the MB setup. the Crutchfield kit provides you with that DLSV add-on that allows you to do that hookup. i went the Jcwhitney route (cost $40 shipped), where you have to perform some surgery on the unit's pcboard to come up with the correct relay connections. after the mods to the unit in that system, hookup is very straightforward.
i think anyone attempting this should do it in two steps. do the lock / unlock first then the convenience features (if you want them). a preliminary step that i found really helpful was to hook everything up with a 12v lantern battery and verifying that everything was working as it should (supplying +12v and -12v using the one wire).
Last edited by jsmith; 08-27-2002 at 01:14 PM.
|
08-27-2002, 01:01 PM
Threaded Mode
