Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-18-2000, 07:31 AM
Jack
 
Join Date: Sep 2000
Location: Sugarland, TX
Posts: 285
The heater blower is not working on my 75 240D, the A/C works. I check the fuse, it was blown. It blown two addition fuses. I put on a third one, the third is ok, but the blower still not work.

jack

Reply With Quote
  #2  
Old 12-18-2000, 05:31 PM
Wm. Lewallen
Guest
 
Posts: n/a
You have the 240D with the 115 chassis. Replacing the heater blower motor is one of the most difficult jobs to do on a Mercedes. First, remove the center console and go at it from there. At some point you will discover that you will have to remove the windowsheild wiper blades. If you do get that far, you will see why. When you do get down to the blower,you will find that it is held on by only three screws,and why you will have to remove the wiper blades. Good luck.
I don't envy you with this job. You can take it. It's really not so hard. It's just what all you have to do to replace a part held on by three screws.Good luck again.
Bill Lewallen Lexington,Ky.
Reply With Quote
  #3  
Old 12-14-2011, 03:37 PM
Registered User
 
Join Date: Sep 2011
Posts: 94
I am tackling this same situation... I removed the window grille and can touch the blower motor, but can scarcely turn it with my hand... I am going to attempt to lubricate it once I get it out... I simply hope I can get the entire console and consensor out! Augh!

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interesting Post on AC from the Ritter/Easley Board ctaylor738 Tech Help 4 08-08-2003 06:36 PM
Plenty of heat...little heat....slow down...heat comes back Dirty Ern Diesel Discussion 15 04-02-2003 11:48 AM
injector heat shields for a 300D - are they necessary? Kent300D Diesel Discussion 13 09-19-2002 11:18 PM
New AC Servo and Amp, Still Full Heat Elripster Tech Help 2 11-27-2001 09:35 PM
No heat on 115 jylee Vintage Mercedes Forum 1 01-02-2001 12:11 AM



All times are GMT -4. The time now is 07:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page