![]() |
|
|
|
|
#1
|
|||
|
|||
As all of the linkage is external, I would think that mis-adjustment is the reason that you can select only one of the shift gates. The rubber grommets on the trans end or the plastic grommets at the shifter are worn. The adjustments are done under the car at the shifter.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
1992 190E 2.3 Exhaust/Noise Problem | jackm | Tech Help | 1 | 03-20-2003 05:47 PM |
Tranny problem | elau | Tech Help | 0 | 02-27-2002 11:24 AM |
used 190e 2.3 auto tranny???????? | joegolden | Tech Help | 7 | 12-03-2001 06:18 PM |
190E 2.3 hot starting problem | chris | Tech Help | 3 | 06-09-2001 05:44 PM |
'92 190E 2.3 - tranny seals blown out?!? HELP | yambrovich | Tech Help | 7 | 12-15-2000 07:07 PM |