|
|
|
|
|
|
#1
|
|||
|
|||
|
Diagnosing bad EZL module - M119
Greetings. I am having a rough idle condition with my 92 500E. I have replaced the upper wiring harness, spark plugs, cleaned and inspected the rotors and caps (ok). The plug wires are new as well. The car will also occasionally idle very low and stall.
I have the ABS and ASR light on intermittantly. I think I am narrowing it down to the EZL module. I am curious if I can diagnose this device myself. There is a 3-pin connector on it, which I can pull with the car running and have no effects good or bad. Normal? Thoughts/Suggestions/Comments are appreciated! Thanks! |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 500E - diagnosing bad shock | hanfrac | Mercedes-Benz Performance Paddock | 9 | 08-09-2003 03:44 PM |
| 1992 500E LH Module | Bryan Harter | Mercedes-Benz Performance Paddock | 15 | 02-10-2003 01:36 PM |
| Diagnosing a bad glow plug | CJ | Diesel Discussion | 6 | 11-08-2002 01:39 AM |
| diagnosing bad lower ball joints | surfblau | Diesel Discussion | 0 | 07-19-2002 12:44 AM |
| 190E, air bag control module bad . | phlynch | Tech Help | 1 | 02-07-2000 10:24 PM |