|
|
|
#1
|
|||
|
|||
I have a 1983 240D. I recently needed to replace the clock. I purchased a used one. The one they sent has the clock/tachometer combination. The clock works fine. I thought about sending it back, but then I thought that it might be really cool to have a tachometer in a car with a manual transmission.
What would it entail to "hook up" the tachometer? |
#2
|
|||
|
|||
I can't tell you how to adapt a tach/clock combination to your car.It would be a lot of work. You might have to change the harmonic balancer, because that is where the RPM sensor is located.
You can repair the present clock in your car fairly easy. Remove the clock and take off the rear cover. You will see two electrolitic capacitors. One is probably bad, But replace both of them. They cost about $1.00 each from Radio Shack. GooD luck Bill Lewallen Lexington,Ky. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
adding a tach to a 240D (standard tranny) | squid1351 | Diesel Discussion | 33 | 05-27-2005 08:40 AM |
ECU and Tach on 85 300TD | benzzy | Diesel Discussion | 5 | 09-24-2004 11:34 AM |
Add tach to 1983 240D? | cbcarter | Diesel Discussion | 1 | 01-16-2004 10:07 AM |
Adding a tach to a 300TD | 81Wagon | Diesel Discussion | 8 | 01-11-2004 07:05 PM |
Will Alum 240D Air Cleaner Fit on 300D | tcane | Diesel Discussion | 0 | 01-10-2002 07:33 PM |