|
|
|
|
|
#1
08-09-2005, 09:17 AM
|
||||
|
||||
|
Am I missing a part?
My front license plate mount (190e 2.6) is angled in the center, following the line of the bumper. Pictures on the internet of others cars look like the mount is flat. Is something missing on my car, some kind of subplate that wil leave the front plate flat and uncreased? I know this is a minor thing, but it is an irritation. Thanks for your help, as always.
MDB 
|
|
#2
08-09-2005, 09:46 AM
|
|||
|
|||
|
Missing Part
I have the same problem. I assume that this is the way things are supposed to be as the MB dealer supplied a new plate braket for my 88 300 with no extra parts to support it on either side. I made some spacers which solved the problem.
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The MAF Mass Air Flow I bought is missing a part | Tony Mah | Tech Help | 3 | 07-24-2005 03:01 PM |
| Found a part from my car in the driveway | H-townbenzoboy | Diesel Discussion | 14 | 07-12-2005 04:29 PM |
| PSE Pump Part Question | rsmcmahon | Tech Help | 5 | 10-01-2003 01:57 PM |
| Group Purchase 86 - 93 W124 Avantguard Grille | placo1 | Mercedes-Benz Used Parts For Sale & Wanted | 78 | 08-26-2003 07:36 PM |
| 95 e320 bumper part missing | 95e320 | Tech Help | 2 | 11-19-2002 09:08 AM |
Linear Mode
