|
|
|
#1
|
||||
|
||||
83 300TDT 123. Rear suspension uneven..
It think most folks avoid self leveling suspension questions like bad milk, so I really did try and search this one out, but was unable to find an answer to my question, so i appreciate any insight.
I just rebuilt the leveling valve on my 83 300TDT. Before rebuild the car sat 23.5" on the left side (measuring from the driveway to the top of the fender opening), and 24.5" on the right. After rebuilding the valve and adjusting it to where the car sat R/side 25" left 24.5. I shut off the car and half an hour later it's at 24 on the left and 24 3/4 right. I'm guessing that there may be a small leak somewhere ( I say small because I haven't noticed any hydrolic fluid dripping), or it could be due to inproper bleeding of the system. My main question is, what would cause it to set higher on one side that the other, or lower, depending on your point of view. I see no leakage around the shocks, or anywhere for that matter. I'm willing to bet the rear shocks and accumulators are stock, the car has 344k on it. Thanks for feedback... |
#2
|
||||
|
||||
i am guessing
that the left side spring has settled with age and driver only driving. i suggest switching the rear springs or replacing one or both of them. i cant think of any reason it would be related to the leveling system. i believe it simply boosts both sides in back until the car is level front to back.
btw i am no expert on the system. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
I've read that the car is supposed to set level without the self leveler engaged at all. If that's the case I probably do need new springs. I guess the springs could be the reason it bleeds down after I shut it off too.
Thanks |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
300td auto leveling rear suspension | Andrew Fekete | Diesel Discussion | 6 | 12-23-2005 05:32 AM |
126 rear suspension - done! | gidpor | Tech Help | 8 | 01-21-2005 10:54 AM |
Rear suspension strut replacement help. | davidmash | Tech Help | 2 | 06-28-2004 05:24 PM |
question about 300E rear suspension part | WANT '71 280SEL | Tech Help | 2 | 06-10-2004 07:43 PM |
rear suspension | josev | Tech Help | 11 | 11-20-2002 10:57 PM |