|
|
|
|
|
#1
10-23-2005, 10:23 PM
|
|||
|
|||
95 S420--wont go into reverse
Greetings from San Antonio...
I am new to the forum...I have a 95 S420 it will not reverse. When I put it in reverse, depending on how level the ground is, it will slowly pull and occasionaly kick in roughly... If I am on totally even ground, it wont back up at all and we have to push it out..But if there is a hill, like coming out of the garage, it will just roll on out. My mechanic says it could be the reverse transmission pump... 
|
|
#2
10-24-2005, 08:13 AM
|
|||
|
|||
That is a common problem & almost always results in major transmission repairs! The reverse clutch material wears out too quickly!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
