|
|
|
|
|
#1
11-11-2005, 10:43 AM
|
|||
|
|||
|
220d coat bearing pin with sealant
As soon as parts arrive I'll be putting in new chain tensioner, tension rail, guide rail. The MB Manual says prior to driving the bearing pin(s) home to coat with sealant. The type of sealant isn't mention, but I'm ceartain a hardening sealant is not what they're referring to. Would a Loc-Tite, or similar sealant from that family of sealants be satisfactory? Thank you.
|
|
#2
11-11-2005, 01:05 PM
|
||||
|
||||
|
i would not
use locktite. it is so tight i can t imagine what it would need sealant for.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.  [SIGPIC]..I also have a 427 Cobra replica with an aluminum chassis.
|
|
#3
11-11-2005, 01:30 PM
|
|||
|
|||
|
sealant
That was my feeling too, not to use a sealant. The manual calls for use of a sealant, so thought I'd ask. Thanks, Tom.
|
 |
| Bookmarks |
|
|
Linear Mode
