![]() |
|
|
|
#2
|
||||
|
||||
How to remove a 210 steering rack
depending where you get the rack, it should come with the new tie rods on it.
Its not a hard job at all to do. Support the front end, center the steering wheel and lock it. remove the front wheels. undo the 2 8mm screws & remove the heatshield from the left tie rod boot. undo the 19mm and 22mm banjo bolts holding the lines on. undo the lower 13mm nut holding the column to the rack and remove the bolt. undo both 22mm nuts holding the tie rods in on each side. undo the 4 16mm bolts holding the rack to the subframe (there are nuts on top you'll have to hold) may I ask why you're replacing your rack? does it just need to be resealed?
__________________
![]() 1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
Bookmarks |
|
|