Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-31-2005, 03:12 PM
riethoven's Avatar
Conservative Radical
 
Join Date: Apr 2005
Location: Eastern Long Island
Posts: 943
1985 300TDt Died - Help!

Hello,

I was pulling out of the parking lot from work after I had backed out of my parking spot and drove to the exit of the lot and pulled into the street and the car just stopped going. The engine was still running but it would not go. I pushed it off the road with some help and checked the tranny fluid. It was a little low but not too bad. I added tranny fluid and it still will not go.

When I move it from park to any of the gears and then back to park I hear the clicking sound like the parking pawl isn't engaged - as if the car was still rolling.

Can it be a flex disc? I got under the car with the brake on and the tranny in drive to see if the front section of the driveshaft was spinning and it wasn't.

Has anyone had this experience? I'm praying it isn't the tranny.
__________________
Doug

1987 300TD x 3
2005 E320CDI
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page