|
|
|
#1
|
|||
|
|||
LED lights in my climate control.
Although the lights in my climate control unti work excellent, I think it would be cool if I put some LED lights in there! I have a 420sel w126. I have seen some post on how to do them to a 124 series climate control but not sure if it is teh same concept. Btw- it gets confusing. How Do i get the bulbs out of there. thanks
|
#2
|
|||
|
|||
On my 124 you start by removing the ash tray and then taking out the screw that hold down the dash plate.
Smiles. However I've heard it said: "If it ain't broke, don't fix it".
__________________
Earl 1993 190E 2.3 2000 Toyota 4x4 Tundra |
#3
|
|||
|
|||
i know hoe to take the unit off. I just dont know how to get the bulbs out of there. I guess you are right on if it aint broke, dont fix it
|
#4
|
||||
|
||||
Use a piece of plastic tubing that well slip over the bulb and use it to pull the little rice bulb out
|
#5
|
|||
|
|||
thanks. I will do that. I have been reading up on previous posts that I cannot just use the led bulbs themselves? I have to use some type of resistor or volatge control?
|
Bookmarks |
|
|