|
|
|
#1
|
||||
|
||||
W123 Manual Winding Rear Door Regulator Parts Needed
I have a 1982 300TD grey market wagon with manual winding window regulators. The right rear door glass dropped into the door this morning, so I removed the door inner panel to discover that the regulator was missing a few parts and the previous owner had propped the glass in the up position with a piece of wood
I researched the EPC and found that I need two parts, but these parts are only available in an assembly from the stealership. Does anyone have these two parts? 1. the U-shaped steel channel (#11) with two tapped bolt hole brackets that sandwiches the base of the door glass. (see EPC image #1) 2. the slotted metal bracket (#11) that bolts to the above mentioned U-shaped channel. This bracket rides on the regulator lift arm (see EPC image #2) Many thanks. Martin http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=123190&A=02003&M=617912&GA=722118&VIN=12319012027322&CT=F&cat=318&SID=73&SGR=060&SGN=04 http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=123190&A=02003&M=617912&GA=722118&VIN=12319012027322&CT=F&cat=318&SID=73&SGR=045&SGN=03 |
#2
|
||||
|
||||
bump
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|