![]() |
|
|
|
|
#1
|
||||
|
||||
8 amps are to low for that circuit, the cover is correct. Check you
Owners manual if you have one, it’s your cars bible. |
#2
|
|||
|
|||
yeah thats what I was thinking because theese fuses are so hard to find around me unless you order online.
Thanks alot, I appreciate it ~Nate
__________________
95 Honda Shadow ACE 1100. 1999 Plymouth Neon Expresso. 2.4 swap, 10.5 to 1 comp, big cams. Autocross time attack vehicle! 2012 Escape, 'hunter" (5 sp 4cyl) |
#3
|
||||
|
||||
Whunter pointed out a good online source for fuses. High-quality brass/copper fuses. $1.50 for a pack of ten
http://www.jbugs.com/store/merchant.mvc? is the site.
__________________
-1983 VW Rabbit LS Diesel (5speed, VNT/Giles build) |
#4
|
||||
|
||||
Yeah, it is OK to use the recommended fuse. Like 420SE said, it may be they were nervous (if they had trouble with that circuit before), or they did not have a proper amp fuse.
It is always better (safer) to use a lower amp fuse than a higher amp fuse than it recommended. Using a higher amperage fuse than what is called for is very dangerous for your automobiles electrical system, but I am sure that you probably already knew that. |
![]() |
Bookmarks |
|
|