Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-14-2006, 08:39 PM
Registered User
Join Date: Jul 2003
Posts: 528
valves fit question on 116

Took head apart to resolve cyl 8 fouling, discovered valves covered with thick carbon, all other cylinders look good.
Pulled valves on cyl 8 and the exhaust valve slides easily compared to the inlet valve, is that normal? went ahead and pulled no7 exhaust valve and it slides out of the guide easy as well. Have a feeling that all I need is new stem seals. Now I need to figure out what parts especially rubber ones I need to replace. Injector o rings etc.
Does any one know how tight the valves go on the guides?

Thanks, Juan
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page