|
|
|
|
|
#1
02-23-2006, 06:14 PM
|
|||
|
|||
|
motor mounts lifespan?
Well now that I am in the middle of replacing valve stem seals and have one of the heads out on a 83 380SL, Is there a benefit in replacing the right side motor mount, or it's just not required? Thanks for your opinions.
__________________
Thanks, Juan 
|
|
#2
02-23-2006, 06:17 PM
|
||||
|
||||
|
If they are original they are shot.
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200
|
|
#3
02-23-2006, 06:45 PM
|
|||
|
|||
|
Engine Mounts
1984 300d Turbo 137 K
Replace 2 Each Engine Mounts, Oil Is Not Good For Engine Mounts And The Valve Stem Seals, **************.com Have The Kit 10 Seals, Guide Book, Tool To Push On Seals, And Extra Valve Lock Nuts, $75.00 3-6 Hrs, No More Smoke After Stop Light. Diy
|
|
#4
02-23-2006, 07:56 PM
|
||||
|
||||
|
2 years ago at 84K miles, my 560SL's driver's side mount was torn (broken) and the pass side was crushed >1/2" from its original height.
__________________
86 560SL With homebrew first gear start! 85 380SL Daily Driver Project http://juliepalooza.8m.com/sl/mercedes.htm
|
|
#6
02-24-2006, 11:31 PM
|
||||
|
||||
|
if you have the heads out why aren't you having the valve guides replaced? Stem seals are just band aids on higher mileage motors.
Motor mounts should Always be replaced in pairs..if one has failed the other is soon to follow. Stick w/ the genuine mounts, or lemforder if you want to save a couple of $$. Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
