hi guys....i just put a new injector pump in my "92" 7.3...but im not having
any luck getting fuel to the injectors..any tricks to getting a new pump
primed?

7.3? You mean like a Brabus 7.3L V12?

Wrong forum I think you need a Ford one!

__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200

The 6.9s and 7.3s take awhile to prime which is why you don't want to run out of fuel. Also there is a check valve in the transfer pump that may have gone South. Most guys install the $35.00 electric fuel pump from Napa parts to get around the priming issue after filter changes and such.

__________________
Auto Zentral Ltd.

Remove the return to the tank from the pump. Atatch a facet fuel pump to the pump. Switch the ignition on to open the stop solonoid then switch the facet fuel pump on and wait until it passes fuel then reconnect the pipes as they should be.

Finally crack off all the injector pipes at th injectors and spin it over until they p1ss out fuel. When you now try to start it it should fire on the button.

__________________
if it seems too good to be true, it probably is.