|
|
|
#1
|
|||
|
|||
380 Connecting rod
The pan is off Next question, is a special socket required to get the connecting rod nuts off? The nuts only have castleated grooves about half the width of the nut. Got the pan clear, took a look and had to run off to an other commitment. They look like a bear to remove. Any hints?
|
#2
|
|||
|
|||
Just a 12 point socket...
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|