The switch E & S near the gear box lever when ever i use to shift the knob to S mode the gear use to change towards the lower side, and after getting a speed of approx 110 Km i use to move the switch to E mode, atonce the gear box use to move in the 5th gear.
The question is that now a days for the last one month or so i dont feel any differnce between the shifting of gears wheni shmove the Switch to E or S.
Shall be greatful if some professional tips are given to get it right.

I might be wrong but no harm in discussing that i had changed the bulb for the gear lever console as it was fused. Most propbaly while changing the bulb i had touched the wires going from the switch to the gear box.

Any views will be highly appreciated

Qamar is a Pakistani name right?

You are 100% correct. Are you also Paki?

no

Erm... why did we need to find this out?

__________________
>Joe

http://www.bonnemay.co.uk/pics/W123_48.gif
1984 W123 230E Saloon/Sedan! (82k miles - Ice Blue as new)
1985 W123 230TE (96K miles - stinkingly nice!)
1995 W124 E320 Wagon (130k miles)
Future projects:
Sportline Suspension W124, W123 TE restoration, A/C, cruise & powered seats retrofit!

>Based in the UK!

walgamuth is of german origins but who cares?

so previously you could tell an obvious difference in the shifting?

then i would suspect an electrical issue. bad connection, blown fuse or such.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.