I started a post on this issue a while back and I have had some good suggestions but am still puzzeld. I have a clunking front right when going over bumps and braking. Had my mechanic look at the tie rods and they seemed to be fine. He told me it was my support rods as I mentioned the car started to bounce fairly hard at 55-65 mph the smooth out until around 80 where it started to bounce again. However, I am not sure if he meant guide rod instaed of support rod. I did have one suggestion that it could be the tie rod mounts or brake supports. Just wondering if anyone has any thoughts before I start dumping money into parts????

The Dude.

1987 560 sel
2002 Taylor Made r580 7.5
2006 Taylor Made r7 8.5

Suspension Guide Rod Replacement
on the 1985 300SD
http://www.peachparts.com/Wikka/W126GuideRod

The jounce/rebound is bad shock and/or a tire issue.




Have a great day.

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/