![]() |
|
|
|
#1
|
||||
|
||||
![]()
Can anyone tell me what size socket I'll need to remove some heads from a 380 motor?
Thanks ![]()
__________________
I'm not a doctor, but I'll have a look. ![]() '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#2
|
||||
|
||||
If the cams are on you'll need the offset M116/7 head bolt bit. I lent mine out more than 5 years ago and forgot who I lent it to
![]() http://www.samstagsales.com/mercedes/mb116589001300.jpg Sixto |
#3
|
||||
|
||||
![]()
Maybe I'll pull the cams first then.
![]()
__________________
I'm not a doctor, but I'll have a look. ![]() '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#4
|
||||
|
||||
The one I got did the job and cost closer to $10.
Pull the cams if you can. Even with the tool it's very tedious to access the head bolts. Sixto |
#5
|
||||
|
||||
![]()
What's needed to pull the camshafts?
__________________
I'm not a doctor, but I'll have a look. ![]() '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
![]() |
Bookmarks |
|
|