Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-25-2006, 01:01 AM
86560SEL's Avatar
Registered User
 
Join Date: Jan 2003
Location: east Tennessee (southeast USA)
Posts: 3,015
Should my engine fan be "roaring" on acceleration?

I know that with the clutch fan, that a "roaring" sound is normal, but I do not think mine is working enough. I am wondering - when I first leave in my car and get on the mail road and accelerate, the fan will roar, like it is really pulling in air, but then when I get to about 40 MPH, it slows down. I NEVER hear it again throughout the day, even when the engine temperature surpasses 100*C. Shouldn't I be hearing this fan more often, especially when the engine temperature goes past 100*C? BTW - my car is a 1985 W126. Since it is working initially, does that mean it is OK? I am just wondering, because I have had cars in the past that roars most all of the time.

Thanks.
Reply With Quote
  #2  
Old 04-25-2006, 01:54 AM
compress ignite's Avatar
Drone aspiring to Serfdom
 
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
VernDammit fan clutch!

See Above
Reply With Quote
  #3  
Old 04-25-2006, 04:10 AM
haasman's Avatar
Registered User
 
Join Date: Jun 2001
Location: San Francisco, CA
Posts: 3,097
The fan clutch is supposed engage when hot and dissengage when cooled.

Stop your car when good and warm, with the engine off reach in and see if you can easily spin the fan. If so, I suspect the fan clutch.

Haasman
__________________
'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)
Reply With Quote
  #4  
Old 04-25-2006, 09:41 AM
Registered User
 
Join Date: Mar 2006
Location: new mexico
Posts: 70
checking fan clutch

i learned this from a friend who has an engine building shop. the first time you do it it's a bit nervewracking. firmly hold a fanblade in each hand and have an assistant start the engine. at cold idle you should feel 5-10 pounds of inertial force attempting to spin the fan if the fan clutch is good. if it has failed you will feel little or no resistance and will be able to spin the fan backwards. have assistant stop the engine before releasing fan. i can't wait to see the replies on this.
Reply With Quote
  #5  
Old 04-25-2006, 10:08 AM
Registered User
 
Join Date: Oct 2004
Location: Baton Rouge La
Posts: 2,632
it's happened to me before.... fan clutch.
__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]
Reply With Quote
  #6  
Old 04-25-2006, 01:07 PM
Hatterasguy's Avatar
Zero
 
Join Date: Nov 2002
Location: Milford, CT
Posts: 19,318
Quote:
Originally Posted by kitchenrat
i learned this from a friend who has an engine building shop. the first time you do it it's a bit nervewracking. firmly hold a fanblade in each hand and have an assistant start the engine. at cold idle you should feel 5-10 pounds of inertial force attempting to spin the fan if the fan clutch is good. if it has failed you will feel little or no resistance and will be able to spin the fan backwards. have assistant stop the engine before releasing fan. i can't wait to see the replies on this.
Makes sense, just don't let it get away from you!

I'd rather be the one starting the car!
__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200
Reply With Quote
  #7  
Old 04-25-2006, 08:05 PM
Registered User
 
Join Date: Sep 2005
Location: JAX, FL
Posts: 140
Quote:
Originally Posted by Hatterasguy
Makes sense, just don't let it get away from you!

I'd rather be the one starting the car!
Yea, me too. How dear to you is your wife?
__________________
65 190d sold
85 380SE sold
87 560 SL 180K
84 380SE 96K (mint)
Reply With Quote
  #8  
Old 04-25-2006, 11:47 PM
t walgamuth's Avatar
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 38,935
Quote:
Originally Posted by kitchenrat
i learned this from a friend who has an engine building shop. the first time you do it it's a bit nervewracking. firmly hold a fanblade in each hand and have an assistant start the engine. at cold idle you should feel 5-10 pounds of inertial force attempting to spin the fan if the fan clutch is good. if it has failed you will feel little or no resistance and will be able to spin the fan backwards. have assistant stop the engine before releasing fan. i can't wait to see the replies on this.
yikes!.... this is one i would only want to watch someone else try.

tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote
  #9  
Old 04-27-2006, 09:36 PM
86560SEL's Avatar
Registered User
 
Join Date: Jan 2003
Location: east Tennessee (southeast USA)
Posts: 3,015
Thanks for the replies. I will check that soon, but I do not think that *I* will be holding that fan blade. I will probably let the shop check it.

I am battling another problem now with the car stalling out.
Reply With Quote
  #10  
Old 04-28-2006, 08:51 AM
Registered User
 
Join Date: Jul 2004
Location: York, PA
Posts: 621
Quote:
Originally Posted by kitchenrat
i learned this from a friend who has an engine building shop. the first time you do it it's a bit nervewracking. firmly hold a fanblade in each hand and have an assistant start the engine. at cold idle you should feel 5-10 pounds of inertial force attempting to spin the fan if the fan clutch is good. if it has failed you will feel little or no resistance and will be able to spin the fan backwards. have assistant stop the engine before releasing fan. i can't wait to see the replies on this.
How many fingers does this guy have? And what does he do if the clutch has failed in a locked position and the fan spins with the starter cranking and then spins up to a nice full speed when idling?
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.

1986 190E 2.3 Black, Auto, Mods to come soon.....
Reply With Quote
  #11  
Old 04-28-2006, 03:33 PM
OMEGAMAN's Avatar
Registered User
 
Join Date: May 2005
Posts: 705
you can reach in stop the plastic fans with the engine running at idle. I can't remember why I tried it the first time but I have done it a bunch of times since then and only have 8 fingers left to go.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page