Hi,

I did use search and came up with bits and pieces of info (mostly related to W123 cars) but I am hoping someone can point me to a comprehensive writeup on how to replace the front and rear brake rotors on a W210 (97 E420).

Many thanks in advance.

/alex

p.s. I regrettably do not own the Shop Manual for the car

__________________
1997 E420

i dont know from experience but i cant imagine it is a lot different from the 123.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Front is MUCH easier than the 123. One allen bolt and the rotor comes off. As I recall you need to remove the caliper and hang it out of the way while you get the rotor off, but it is quite an easy job. Rotor may be rusted in place, but a few persuasive smacks with a hammer will convince it to come off.

Len
'99 E300TD 93,000 miles

Look on top of this page,Look under DIY tab.

__________________
96' E320

what worried me were the descriptions of having to disassemble the wheel hub assembly to remove the rotor. It sounds like that is not necessary?

Thanks

/alex

__________________
1997 E420