I have a manual, but it's too simple.

My car's a daily driver, so I want to make sure I know what I'm in for and what parts I need to buy before I pull it to bits.

I need a blow up of the servo housing on the rear RHS of the auto trans behind a SOHC 103 engine. It's above the pan and is just up and around from the electro magnetic switch on the rear RHS of the box. Same side as the exhaust.

It's circular, held on with 3-4 allen head bolts and one 10mm head nut on a stud. Oh, and it leaks a lot of oil.........

Thanks!