Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-19-2006, 01:17 PM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
W124 windows will not close with door locks

I recently picked up a 1992 300E California car with 145k. I love everything about it, and would love it more if everything worked. Right now Im trying to get the windows to close with the door key. The drivers windows will roll all the way down with one push, and all windows work perfectly at the switches. When I try the door lock trick, nothing. I have held the key (all 3 keys actually) in the lock position, nothing.
I've tried everything I've seen posted and recommended. Before I go and replace the CCM I was wondering if anyone had a new idea.
I also decoded my VIN, and I didn't see an option listed for this function. Can anyone tell me if this is something that is listed in the option codes? Perhaps my car just doesnt have the function.
I've also tried the "tunnel" functionwith the recirculation switch, and nothing there too.

One other problem, probably a bit more urgent, 10mpg!! The car runs strong, smooth, recently passed smog. Only issue is that if it has sat for more then an hour, I have to turn the ignition twice to get it to start. First try fires and dies immediately. Second try runs fine. Sounds to me like a faulty fuel valve leeking and loosing pressure to the injectors, but with this car nothing seems that easy, and I'm not sure if this explains the milage issue. I've never seen a puddle of fuel after the car has sat, so I dont think it's hemoraging gas.

Can anyone on this fine forum help a newbie out? FYI, I did spend hours going through the forums reading similar issues before posting. I just haven't found issues exactly like mine.

Reply With Quote
  #2  
Old 07-19-2006, 01:24 PM
dtf dtf is offline
Registered User
 
Join Date: Jul 2003
Location: South East CT
Posts: 874
Welcome to the forum. The window closure is an option that you might not have. Did you hold the key in the drivers lock turned all the way to the right for at least 5 secs? That would close the windows if you had that feature. Not sure what you mean about Tunnel function.
__________________
dtf
1994 E320 Wagon (Died @ 308,669 miles)
1995 E300 Diesel (228,000)
1999 E300 Turbodiesel ( died @ 255,000)
2006 Toyota Tundra SR5 AC 4X4 (115,000 miles) rusted frame - sold to chop shop
2011 Audi A4 Avant (165,000 miles) Seized engine - donated to Salvation Army
BMW 330 xi 6 speed manual (175,034 miles)
2014 E350 4Matic Wagon 128,000 miles
2018 Dodge Ram 21,000 miles
Reply With Quote
  #3  
Old 07-19-2006, 02:23 PM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
The "tunnel" function is an option on mostly european versions, when you hold the recirculation switch on itll close sunroof and windows, hold the switch off, everything returns to previous open condition.

Yes, I have held the key in the locked position for an extended period of time, nothing.

As for it being an option, wouldnt it be listed in the option codes? All I've read gives me the feeling that it was installed on all 1992 cali w124s.

A definative answer would be most appreciated, at least I can move on to the next issue.
Reply With Quote
  #4  
Old 07-19-2006, 02:43 PM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
This is probably completly unrelated, but perhaps not.

The so-called "Convience feature" on my '96 E closes the windows if I hold the IR transmitter button or hold the key in the lock position for more than two seconds. But for this feature to work, the windows must be synchronized (presumably with the CCM). They may lose their synchronization if the power is absent.

The owner's manual describes the synchronization procedure.
Reply With Quote
  #5  
Old 07-19-2006, 02:47 PM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
I dont have keyless entry, so no IR transmitter. As for the synchronization, this is not listed in the 1992 manual, but thanks for the input!
Reply With Quote
  #6  
Old 07-19-2006, 05:39 PM
MrCjames's Avatar
California Dreaming
 
Join Date: Jun 2003
Location: SF Bay Area
Posts: 599
A quick reference to determine if a 124 vehicle is fitted with convenience feature is to look at the door handles, the chrome strips are a dead give away. You did say that your windows do work with the one touch "Down" command via the switch group. This may be a good sign because the control unit is responding to the “Down” command. Have you tried operating the "Convenience Control” from either the passenger door or the trunk lock? If not, try it at the other two points and let us know what the results are.

Reply With Quote
  #7  
Old 07-19-2006, 06:10 PM
'91 300CE's Avatar
What the?
 
Join Date: Jul 2006
Location: Vancouver, WA
Posts: 17
Mine only works to globally open the car from the drivers door IF and ONLY IF everything is closed... if I leave the sunroof popped up and come back to the car and try to open the windows globally they won't... UNTIL I close the sunroof with the lock position, THEN I can globally open the windows.

My global close feature works everytime however.

I am going to have to try this "tunnel feature"
Reply With Quote
  #8  
Old 07-19-2006, 06:27 PM
ebennz's Avatar
Fire/Medic
 
Join Date: Nov 2000
Location: Hurricane, West Virginia
Posts: 878
a lot of w124 alarms were disabled.
if yours was disabled the window close with key feature will not work.


extreme gas consumption may be fuel distributor-BIG BUCKS.

get it diagnosed by a good m.b. indy mech
__________________
*92 400e 124.034, SOLD

*92 300e 124.030, SOLD
Reply With Quote
  #9  
Old 07-19-2006, 06:44 PM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
Thanks for the feedback, this forum rocks!

My handles all have the chrome strip, so I should have the function. I have tried it with all keys at all entry points. nothing. I've tried it with all open, I've tried it with everything closed. nothing. The antitheft is hooked up, I've set off the horn a few times opening the trunk when the doors were locked.

As for the fuel distributer, I'll have it diagnosed this week, and let you know.
Reply With Quote
  #10  
Old 07-29-2006, 03:22 PM
iwrock's Avatar
roflmonster
 
Join Date: Nov 2003
Location: Hella NorCal
Posts: 3,313
On the 1993 400E I had, it was listed under the options when I decoded the VIN. It also appears when I decoded the vin on my 1996 SL600.
__________________
-Justin

91 560 SEC AMG - other dogs dd
01 Honda S2000 - dogs dd
07 MB ML320 CDI - dd
16 Lexus IS250 - wifes dd

it's automatic.
Reply With Quote
  #11  
Old 07-31-2006, 05:55 PM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
Thanks Justinwrock, but could you tell me what the code number is for that option, and how it is listed?

I really appreciate this, it's kinda driving me nuts at this point
Reply With Quote
  #12  
Old 07-31-2006, 06:36 PM
Strider's Avatar
Registered User
 
Join Date: Sep 2003
Location: Washington
Posts: 83
Quote:
Originally Posted by doggy99x
Thanks for the feedback, this forum rocks!

My handles all have the chrome strip, so I should have the function. I have tried it with all keys at all entry points. nothing. I've tried it with all open, I've tried it with everything closed. nothing. The antitheft is hooked up, I've set off the horn a few times opening the trunk when the doors were locked.

As for the fuel distributer, I'll have it diagnosed this week, and let you know.
Do you have the original Becker stereo head unit installed? If not, then your alarm system is suspect, as there is a wire for the alarm that connects to the back of the head unit case. When I replaced my head unit with a Blaupunkt, I had to hook up this wire to the Blaupunkt before my alarm would work properly again. Other people have claimed that they didn't need to do anything with this wire after upgrading the head unit...
__________________
On the plains of hesitation bleach the bones of countless millions who at the dawn of victory, sat down to wait, and waiting -- died
Reply With Quote
  #13  
Old 08-01-2006, 10:32 AM
Registered User
 
Join Date: Jul 2006
Location: Orange County CA
Posts: 26
Interesting lead Strider, I do have an aftermarket head unit installed. I'll have to pull the unit and check for loose wires.
Reply With Quote
  #14  
Old 08-02-2006, 06:12 PM
Registered User
 
Join Date: Jan 2006
Location: Portland OR
Posts: 56
I just tried the window close feature in my 1992 300CE. With the sunroof closed, I turned the driver door key to the right and the windows closed.

I have never heard of this feature before. Thanks for the info.
__________________
1994 E320 Cabriolet
1992 300CE (Sold)
1991 300SE (Sold)
1986 560SEL (Sold)
Reply With Quote
  #15  
Old 08-02-2006, 07:29 PM
iwrock's Avatar
roflmonster
 
Join Date: Nov 2003
Location: Hella NorCal
Posts: 3,313
Well, I ran the VIN of my old 400E, and it didn't pop up in the options list. I thought it did, but i guess i was wrong.....

__________________
-Justin

91 560 SEC AMG - other dogs dd
01 Honda S2000 - dogs dd
07 MB ML320 CDI - dd
16 Lexus IS250 - wifes dd

it's automatic.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page