|
|
|
|
|
#1
08-13-2006, 02:30 AM
|
|||
|
|||
|
Turn Signals all stopped working
All of my turn signals, both front and rear have stopped working. It was wondering fine the day before and then suddenly they stopped working. I checked all the fuses but they are all intact and working. What could be the problem?
|
|
#2
08-13-2006, 06:57 AM
|
|||
|
|||
|
What car? On the 123 chassis sometimes the hazard switch gets stuck in between on and off and this causes the turn signals not to work. Try turning the hazard lights on and off a few times.
Len
|
|
#3
08-13-2006, 10:51 AM
|
||||
|
||||
|
On my 95 E420 the relay that runs I believe the wipers also had something to do with the turn signals! Relay was not making good contact! If I pushed down of the relay it worked! I juryrigged a block made of cardboard for the top of the relay and when the cover was snapped down it pushed the relay down! Been working over 2yrs. now!
 Smokie
__________________
95 E420 BigBlue 500E Sway bars 2001 C Class 16 in. Rims KYB Struts and shocks Rear spoiler American Stitches Wheel Bigred 99 F250 Powerstroke JVC EXAD Mp3 player JVC EXAD GPS 
|
|
#4
08-14-2006, 09:30 AM
|
||||
|
||||
|
If it's a w126, check the relay under the steering wheel.
A shoot of contact cleaner and mine started to work perfectly. (only after cleaning the hazard, replacing old fuses, etc...)
__________________
-1983 VW Rabbit LS Diesel (5speed, VNT/Giles build)
|
 |
| Bookmarks |
|
|
Linear Mode
