Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-07-2001, 09:36 PM
brendanroadrunner
Guest
 
Posts: n/a
Any ideas how to remove door panels to replace speakers. I'm afraid of prying anything. Any help would be greatly appreciated.

Reply With Quote
  #2  
Old 04-07-2001, 11:19 PM
Senior Member
 
Join Date: Mar 2001
Location: Accokeek, MD
Posts: 683
Not sure on your model but on mine you have to remove the screw located along the edge of the door panel near the door latch. Then the panel lifts upward to unhook at the window.
__________________
Earl



1993 190E 2.3
2000 Toyota 4x4 Tundra
Reply With Quote
  #3  
Old 04-08-2001, 03:02 AM
David C Klasse's Avatar
CheFrac is Back!
 
Join Date: Jan 2001
Location: Mission Hills in the City of San Diego
Posts: 2,355
There should be a number of screws to undo, probably 4. Someone will give you an exact number. Some of the screws will be hiding to it's difficult to tell how many there are. And then you should be able to pry it off/pull it up.
__________________
2006 E350 w/ 155k miles (Daily Driver)

Previous:
1993 300E 3.2L Sedan w/ close to about 300k miles
2003 E500 Brilliant Silver (Had 217k miles when totalled!)
1989 300E with 289,000 miles (had for <1 yr while in HI)
03 CLK 500 cabrio (Mom's)
2006 C230k (Dad's)
1999 S420 (Mom's/Dad's)
2000 C230k Sport sedans
2001 CLK320 Cabrio (Mom's)
1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)
Reply With Quote
  #4  
Old 04-08-2001, 07:35 AM
MBenzNL's Avatar
MBenzNL
 
Join Date: Jan 2001
Location: the Netherlands
Posts: 1,417
You need to remove the wood panel near the door opener first. Push up the bottom of that small wooden panel and pull it gently out. You will see a screw behind that which will make it possible to take out the next panel that contains the trim along the (un)lock button and the power seat button containing trim.
Behind these trims there has to be a screw that holds the door handle...there may be some additional screws in the underside of the armrest. You have to remove the chrome trim near the lock as well.
I never went any further, so I don't know what fixations are in the back of the door panel. You need to shove it upwards or pull it towards you after which the top of the panel has to be shoved upwards to get that part out...

Somebody will probably give you some more useful advice...

greetingz,

__________________
1990 300SL-24
1993 C250D
with a minor 600+k kilometer
www.MBenzNL.com
(the Netherlands)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
hardtop removal '94 SL500 jcciem Tech Help 1 06-25-2004 12:36 AM
SL500 Interior Panel Removal tjrob Tech Help 0 02-08-2004 08:27 PM
SL500 soft top wrinkle removal KenSilver Mercedes-Benz SL Discussion Forum 9 08-12-2003 12:04 AM
2000 SL500 door panel removal Marc Troy Tech Help 0 05-06-2003 06:41 AM
Heater control unit removal SL500 PritJutla Tech Help 2 12-19-2002 08:41 AM



All times are GMT -4. The time now is 06:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page