have 1990 300te
want to replace rims
what is the highest inches hieght and width i can put on it

Plenty of answers to this question in the wheel & tires section of the forum.

I think you can 8" on the front and 9" on the rear. Please verify that with a search. Here is a link so you can compare wheel and tire combinations. http://www.miata.net/garage/tirecalc.html Remember that you want to stay close to the same circumference.

__________________
Doug

1987 300TD x 3
2005 E320CDI

i just put 215-55-16's on two cars... the width..is 7.5.

you could probably go to 8's with the right offset... maybe an offset in the higher 30's

the 16's have an offset of 46... i think stock on the 15's was 49

might be able to go up to 225's...why push it..

or you should be able to go 17's and change the profile to 45's... but i think the 16's are a great combination of filling the rear well, looks, and handling..

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]